Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Functions
This series is widely used for Izod and Charpy impact test on plastics and plastic pipes. Equipped with tensile impact pendulum and fixtures, it can carry on tests on plastic film and sheet.
Newly designed model offers the most cost-effective configuration to address Charpy test from 1J to 50J, and Izod test from 1J to 22J.
Standards
ISO 179, ISO 180, ISO 8256, ISO 9854.1, ASTM D256, ASTM D1822
Features
High resolution
Using a shaftless encoder allows angle resolution of 0.045 °
Energy losses
Shaftless encoder for angle measurement rotates without any friction; only support bearings friction and windage has the lowest energy losses
LCD display
LCD display provides easy setup of specimen dimensions, pendulum energy, units and calibration data. Also it can intuitionally display test results: absorbed energy and impact toughness
Exchangeable pendulum
Simply change the pendulum to satisfy Charpy, Izod and tensile impact test
Center alignment
Rotating design is quick and accurate to align specimen center for Charpy test
Supports and anvils
Supports are tightened to seat by dovetail groove firmly; only need remove two bolts to change the supports
Broader test space
Single column structure offers broad test space, easy to install low temperature impact test accessories in the future
Parameter
1. Capacity
Ø Charpy for plastics: 1J, 2J, 4J, 7.5J, 15J, 25J, 50J
Ø Charpy for plastic pipe: 15J, 50J
Ø Izod: 2.75J, 5.5J, 11J, 22J
Ø Tensile impact: 7.5J, 15J, 25J
2. Angle of striking: 150°
3. Angle resolution: 0.045°
4. Charpy Test for plastics (ISO 179)
Ø Velocity of striking: 2.9m/s (≤5J), 3.8m/s (>5J)
Ø Distance from the axis of support to the center of percussion: 230mm(≤5J), 395mm(>5J)
Ø Span: 40mm, 60mm, 70mm (can be adjusted by span block)
Ø Specimen dimension (LxWxH):
80mmx10mmx4mm, 50mmx6mmx4mm, 120mmx15mmx10mm
5. Charpy Test for plastic pipe (ISO 9854.1)
Ø Velocity of striking: 3.8m/
Ø Distance from the axis of support to the center of percussion: 395mm
Ø Span: 40mm, 70mm (can be adjusted by span block)
Ø Specimen dimension (mm)
Functions
This series is widely used for Izod and Charpy impact test on plastics and plastic pipes. Equipped with tensile impact pendulum and fixtures, it can carry on tests on plastic film and sheet.
Newly designed model offers the most cost-effective configuration to address Charpy test from 1J to 50J, and Izod test from 1J to 22J.
Standards
ISO 179, ISO 180, ISO 8256, ISO 9854.1, ASTM D256, ASTM D1822
Features
High resolution
Using a shaftless encoder allows angle resolution of 0.045 °
Energy losses
Shaftless encoder for angle measurement rotates without any friction; only support bearings friction and windage has the lowest energy losses
LCD display
LCD display provides easy setup of specimen dimensions, pendulum energy, units and calibration data. Also it can intuitionally display test results: absorbed energy and impact toughness
Exchangeable pendulum
Simply change the pendulum to satisfy Charpy, Izod and tensile impact test
Center alignment
Rotating design is quick and accurate to align specimen center for Charpy test
Supports and anvils
Supports are tightened to seat by dovetail groove firmly; only need remove two bolts to change the supports
Broader test space
Single column structure offers broad test space, easy to install low temperature impact test accessories in the future
Parameter
1. Capacity
Ø Charpy for plastics: 1J, 2J, 4J, 7.5J, 15J, 25J, 50J
Ø Charpy for plastic pipe: 15J, 50J
Ø Izod: 2.75J, 5.5J, 11J, 22J
Ø Tensile impact: 7.5J, 15J, 25J
2. Angle of striking: 150°
3. Angle resolution: 0.045°
4. Charpy Test for plastics (ISO 179)
Ø Velocity of striking: 2.9m/s (≤5J), 3.8m/s (>5J)
Ø Distance from the axis of support to the center of percussion: 230mm(≤5J), 395mm(>5J)
Ø Span: 40mm, 60mm, 70mm (can be adjusted by span block)
Ø Specimen dimension (LxWxH):
80mmx10mmx4mm, 50mmx6mmx4mm, 120mmx15mmx10mm
5. Charpy Test for plastic pipe (ISO 9854.1)
Ø Velocity of striking: 3.8m/
Ø Distance from the axis of support to the center of percussion: 395mm
Ø Span: 40mm, 70mm (can be adjusted by span block)
Ø Specimen dimension (mm)