1003.JPG
1003.JPG

Rubber low temperature brittleness tester

HK$0.00

The rubber low-temperature brittleness tester is the highest temperature when the sample is damaged by impact under the specified conditions, that is, the brittleness temperature, which can be used to compare the performance of plastics and other elastic materials under low temperature conditions. It can measure the brittleness temperature and low temperature performance of vulcanized rubber of different rubber materials or different formulations. Therefore, it is indispensable in the quality inspection of scientific research materials and their products, and the control of production processes. The instrument is designed according to GB1682 national standard. The technical indicators meet the requirements of HG 2-162-1965 plastic low temperature impact compression test method and GB5470-2008 plastic impact embrittlement temperature test method.

Technical parameters

 

1. Test temperature and time: -70 degrees (normally more than 1 hour)

2. Impact speed: 2m/s±0.2m/s

3. After the constant temperature, the temperature fluctuation during the test within 3 minutes: <±0.5°C fluctuation is small, and the temperature control is more accurate.

4. Distance from the center of the impactor to the lower end of the holder: 11±0.5mm

5, size: 910×510×860 studio size: 240×170×150 (length × width × height)

6, power: 800W

 

The rubber low-temperature brittleness tester is the highest temperature when the sample is damaged by impact under the specified conditions, that is, the brittleness temperature, which can be used to compare the performance of plastics and other elastic materials under low temperature conditions. It can measure the brittleness temperature and low temperature performance of vulcanized rubber of different rubber materials or different formulations. Therefore, it is indispensable in the quality inspection of scientific research materials and their products, and the control of production processes. The instrument is designed according to GB1682 national standard. The technical indicators meet the requirements of HG 2-162-1965 plastic low temperature impact compression test method and GB5470-2008 plastic impact embrittlement temperature test method.

Technical parameters

 

1. Test temperature and time: -70 degrees (normally more than 1 hour)

2. Impact speed: 2m/s±0.2m/s

3. After the constant temperature, the temperature fluctuation during the test within 3 minutes: <±0.5°C fluctuation is small, and the temperature control is more accurate.

4. Distance from the center of the impactor to the lower end of the holder: 11±0.5mm

5, size: 910×510×860 studio size: 240×170×150 (length × width × height)

6, power: 800W

 

The rubber low-temperature brittleness tester is the highest temperature when the sample is damaged by impact under the specified conditions, that is, the brittleness temperature, which can be used to compare the performance of plastics and other elastic materials under low temperature conditions. It can measure the brittleness temperature and low temperature performance of vulcanized rubber of different rubber materials or different formulations. Therefore, it is indispensable in the quality inspection of scientific research materials and their products, and the control of production processes. The instrument is designed according to GB1682 national standard. The technical indicators meet the requirements of HG 2-162-1965 plastic low temperature impact compression test method and GB5470-2008 plastic impact embrittlement temperature test method.