Principle of Operation

T-slot tables allow users to secure components that can't be held with standard grips to a universal testing machine. Commercially available T-slot nuts are slid into the inverted T-slot of the table. Bolts, studs, or threaded rods can then be threaded into the nuts. The T-slot table can be used to secure specimens that might otherwise be ejected from the test space under load.

The T-slot table can also be used to position specimens in the same location for repeated tests or batch testing of product. Guides, slides, or stops can be positioned on the table and bolted into position to allow precise placement of the specimens for every test.

Equipment Overview

HZ-1009A Dual Column Universal Tensile Testing Machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, This machine is simple to operate, simple structure, it can be directly placed on the testing table for test, especially suitable for controlling quality in production line This series of machine is mainly applied to test the non-metallic and metallic materials which the load is less than 100KN.

Standard

GB/T16491-1996 ,GB/T 528, GB/T 529, ASTM D412,ASTM D638 etc

Main Feature

This machine is suitable for stretching, compression, bending, shearing and peeling of materials and products in various textile, rubber, plastic, synthetic leather, tape, adhesive products, plastic film, composite materials, electronics, metal and other industries. A variety of tests, such as 90 degrees and 180 degrees), tearing, two-point extension (with an additional extensometer), to determine the quality of the product.

Applicable Industry

It is widely used in small size metal ， rubber ， wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested

 Capacity 5KN,10KN,20KN,50KN,100KN optional

Computer system RealTest software control, Chinese and English operation

Units Kg、Lb、N, (can be exchanged)

Measurement system load weight + RealTest System ± 0.5% (5% -100% of full scale)

Spring out diameter 25~300mm

Height of springs in free state 500mm

Operating temp degree -10° to +40°C, +10 to +90% non-condensing

Resolution 1/50000

Effective test width 420mm

Data sampling frequency 200HZ

Power system Taiwan Delta AC motor,deceleration device from Italy

Maximum test space Approx. 1200mm (with gripper, special test space can also be customized )

Test speed 0.001~300 mm/min (Can customize to 1000mm/min）

Display mode RealTest software system:

① single test, 10-point statistics manually，automatically calculate

②. Multi-unit automatically exchange such as kg, Lb, N;

③. function of free to take point;

④. With multi-calibration function;

⑤. Auto printing function;

⑥. Using 24-bit AD acquisition, resolution 1 / 200000;

⑦. Overload protection function , effectively preventing machine from overload

Safety devices overload, emergency stop , limited devices of displacement,leak current protection

Power 1000W(depending on different demand of force using different motor)

Machine size 85×65×210cm (length width height)

Weight About 790KG

Power supply AC 400V/50HZ single-phase