HZ-1004A Dual Column Universal Testing Machine for Copper Wire

Equipment Overview

HZ-1004A Dual Column Universal Testing Machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, This machine is simple to operate, simple structure, it can be directly placed on the testing table for test, especially suitable for controlling quality in production line This series of machine is mainly applied to test the non-metallic and metallic materials which the load is less than 5KN.

Standard

GB/T16491-1996,EN 388, GB/T 528, GB/T 529, ASTM D412,ASTM D638,ISO 37 etc

Main Feature

This machine is suitable for stretching, compression, bending,  shearing  and  peeling  of  materials  and

products in various gloves, textile, rubber, plastic, synthetic leather, tape, adhesive products, plastic film, composite materials, electronics, metal and other industries. A variety of tests, such as 90 degrees and 180 degrees), tearing, two-point extension (with an additional extensometer), to determine the quality of the product.

Applicable Industry

It is widely used in small size copper wire ， rubber ， gloves, wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.

Technical Parameters

 Model HZ-1004A (Computer type)

Capacity 1KN, 2KN,5KN optional

Compute r system RealTest software control, Chinese and English operation

Units Kg、Lb、N, (can be exchanged)

Measurement system load weight + RealTest System

Load accuracy load weight + HZ-2000 display ± 0.5% (5% -100% of full scale)

Resolution 1/250000

Effective test width The distance between the test column and the sensor is 60mm.

Data sampling frequency 200times/sec

Power system Taiwan Delta AC motor,deceleration device from Italy

Maximum test space Approx. 500mm (without gripper, special test space can also be customized )

Test speed 0.001~500 mm/min (Can customize）

 Display mode RealTest software system:

① single test, 10-point statistics manually and automatically calculate its average and break values;

②. Multi-unit automatically exchange such as kg, Lb, N;

③. function of free to take point;

④. With multi-calibration function;

⑤. Auto printing function;

⑥. Using 24-bit AD acquisition, resolution 1 / 200000;

⑦. Ratio of Breakpoint from 0 ~ 99%, which the user can set according to different materials to stop the machine

⑧. Overload protection function can be set, effectively preventing machine from overload

Safety devices overload, emergency stop , limited devices of displacement,leak current protection

Power 750W(depending on different demand of force using different motor)

Machine size 75×55×192cm (length width height)

Weight About 230KG

Power supply AC 220V single-phase

ASTM B33 Tension Copper Wire Test

ASTM B33 tension test on copper wire specification covers tinned, round, soft, or annealed copper wire for electrical purposes. As stated by the ASTM B33 standard, the tinned wire shall conform to the required tensile strength and elongation. The adherence of coating on the ASTM B33 specified wire shall be determined on representative samples taken before stranding or insulating. The adherence of coating shall be determined by the wrapping and immersion test in addition utilizing the ASTM B33 tension test on copper wire.